Solvangsvej 16 4681 Herfølge
+45 53892444
info@e-at.dk

E-AT Coating

Coatings to protect your ventilation

We offer a range of solutions that can be adapted to most of the existing ventilation systems. Both in storey properties, production facilities and on, for example, ships. All our coatings are fire resistant, easy to work with and cost effective. Combined with a long life expectancy, coating is a sustainable choice.

 

The ventilation system in a building, in case of fire, can cause fire and smoke around the building.Therefore, fire protection of ventilation is an important part of a building’s fire protection. E-AT has developed coating solutions specifically for use in ventilation.

Our solution means that we clean and use coating to maintain existing ventilation. The fire-retardant properties of the coating help prevent the fire from spreading and contribute to the building’s fire protection. Compared to traditional methods of cleaning and fire protection, E-AT’s solution is cost-effective as we avoid many of the traditional costs of materials and labor.

The solution can be adapted to both round and square vents of different sizes. The coating is flexible and can be used on the surfaces typically found in the ventilation system.

Production, offshore and maritime

We know that ventilation on ships and in production facilities is exposed to conditions that increase the risk of corrosion and shorten the life of the channel. This may be due to both the high salt content of the air and chemical vapors. We can help both cruise ships with pools.

As in buildings, the ventilation system on ships is also an important part of the ship’s fire protection because ventilation can cause fire and smoke throughout the ship. The fire-retardant properties of the coating help prevent the fire from spreading and contribute to the building’s fire protection.

Compared to traditional methods of controlling corrosion in ventilation and fire protection, E-AT’s solution is cost-effective, as we avoid many of the traditional costs of materials and labor. At the same time, it is a quick method so that daily routines are minimally affected.

The solution can be adapted to both round and square vents of different sizes. The coating is flexible and can be used on the surfaces typically found in the ventilation system.

WHY CHOOSE OUR COATINGS?

  • The coating seals leaking ducts so that less energy is wasted on leaky systems

     

  • Flame retardant coating
  • Extends the life of new and old plants. The solution can also be used if the system is already suffering from rust or corrosion
  • Less dust is collected in the system because the dust has more difficulty in sticking to the coating than in an ordinary. tube. This results in the dust being collected in the filters and not in the pipe system
  • Our coatings are easy to work with and environmentally friendly
  • We offer a special coating (SC50) which is suitable for environments with a high risk of corrosion and has good resistance to chemical fumes
  • Our coatings are easy to work with and environmentally friendly

For selling and delivering to the maritime, we refer to Danish maritime standard conditions.

PRODUCT CHARACTERISTICS:
° High performance sealant that closes holes and leakages in the duct system, reducing energy consumption and increasing
longevity of the ducts

° Dispels dust

° Improved crack resistance, high flexibility and self-healing of micro cracks

° Waterproof

° Approved as fire resistant in accordance with DS/EN 1361-1 2013 and DS428 (fire technical precautions in ventilation ducts)

° Excellent adhesion properties

° Easy to apply and excellent formability


RECOMMENDED USE:
Ventilation ducts in residential and
office buildings with normal conditions
(for ducts exposed to corrosive environments we recommend SC50)


VOC: 5g/l


SURFACE DRY: 20°: 2 hours


RECOMMENDED FILM THICKNESS:
Wet film ± 215 μm


Dry film:
± 120 μm


THEORETICAL SPREAD RATE: 0,6-1,5 kg/m2


FIRE RESISTANCE:
Coating is fire resistant, does not burn

PRODUCT CHARACTERISTICS:
° High performance sealant that closes holes and leakages in the duct system, reducing energy consumption and increasing
longevity of the ducts

° Good anticorrosive properties. Act as a protective barrier between the metal and
the corrosive environment, stopping future corrosion. Our solution also works on ducts where rust have already formed

° Dispels dust

° Improved crack resistance, high flexibility and self-healing of micro cracks

° Suitable for use in environments where
the ventilation is exposed to chemical
fumes. Does not degenerate.
Tested in accordance with DS/EN ISO
2812-3, 2012

° Fire resistant. Approved as fire resistant
in accordance with DS/EN 1361-1 2013
and DS428 (fire technical precautions
in ventilation ducts)

° Excellent adhesion properties

° Easy to apply and excellent formability


Recommended use:
Recommended for use in ventilation ducts exposed to corrosive environments, e.g. on ships/maritime environments and laboratories


VOC: 5g7l


SURFACE DRY 20°: 2 hours


RECOMMENDED  FILM THICKNESS:
Wet film ± 215 μm
Dry film: ± 120 μm


THEORETICAL SPREAD RATE:
0,8-1,5 kg/m2


FIRE RESISTANCE:
Coating is fire resistant, does not burn


PH RESISTANCE:
Tested in environments with a pH ranging from 3-12. Coating show no degeneration
or reduction in longevity. However, estimated coating performance will vary depending
on type of chemical, concentration of fumes, their temperature, exposure duration and amount of moisture. Please contact us for more information.

PRODUCT CHARACTERISTICS:
° Excellent adhesion properties

° Easy to apply and excellent formability

° Excellent protection against corrosion
in humid environments

° Can be used as an adhesion primer
(diluted with 25% water)

° Waterproof

° High formability

° Shock resistance


RECOMMENDED USE:
Drains and downpipes


VOC: 5g/l


SURFACE DRY: 20°: 1 hours


RECOMMENDED FILM THICKNESS:
Wet film: ± 635 μm Dry film: ± 365 μm


THEORETICAL SPREAD RATE:
0,8-1,0 kg/m2


FIRE RESISTANCE:
Does not burn, however melts
at high temperatures


PH RESISTANCE:
Corrosion class 4—at 800g/m2
(=365 μm dry film)